How to Clean Toilet Hard Water Stains?

How to Clean Toilet Hard Water StainsHard water stains are literally a big problem in the bathroom and it is not so easy to find out guidelines on how to clean toiled hard water stains. We are often terrified about this problem. When you invite guests to your house and suddenly they see the hard water stains, it is a very awkward and bad moment. So to get rid of this problem, you have to take some special measures to remove this stain.

Remember, it is not that much easy as the normal stains, but a little effort can remove these stains and makes your toilets clean. Some people don’t regularly clean the bathroom tiles carefully. Keep in mind that, regular cleaning can make the work easier. You don’t have to put a huge effort into cleaning and removing these stains if you wash and clean your bathroom floor regularly.

Hard water refers to any water which has an excess presence of sediments and minerals, suchlike calcium and magnesium. When you continue to use your appliances and fixtures, hard water will continue to build up and after a while, it will leave a rust stain and scale a stain that is impossible to remove. Especially Toilet bowls are susceptible because they hold water all time.

To protect your appliances and fixtures from hard water stains, it’s important to stop the overuse of harsh, store-bought chemical cleaners. There are some other ways to remove these stains. You can follow any of them.

Baking Soda & Vinegar

Baking soda is one of the most powerful cleaning agents so far. It has some amazing benefits if you use this regularly in your bathroom. if you want to use this for removing hard water stains follow the instructions below:

Hard water stains from your toilet bowl:

Before cleaning, flush your toilet and then directly pour one cup of white vinegar into the bowl.  Use the brush to mix it with the room temperature water. Let the mixture sit for at least 3 minutes. The next step is to add baking soda. Add one cup of baking soda and two cups of vinegar. Soon after mixing, you can see that the mixture starts to fizz and bubble up. Let it continue to fizzing and then sit for 5 minutes.

Use a toilet brush and swish the mixture around. Carefully scrub the hard water stain in your toilet bowl. Make sure that all the stains are gone. After scrubbing, leave the mixture to sit for another 20 to 30 minutes. Gently scrub with the brush a few more times until the hard water stain is completely gone. After cleaning, flush the toilet and enjoy a stain-free bathroom.

Borax & Vinegar

The second best method is using borax and vinegar to remove the hard water stains. If you’ve tried the previous tip and still some stains are there, it might be the perfect time to use the second-best material; borax. Borax is a chemical cleaning agent and one of the most used antiseptic ones too. Before cleaning, first, flush the toilet. Remember, flushing the toilet is a must.

After that, pour a quarter of a cup of borax into the toilet bowl. Use a toilet brush to swish it around circularly. Next, add one to two cups of white vinegar and leave the mixture to sit for 20-30 minutes. After that, use the mixture to scrub the area with a toothbrush.

If there are still some stains try to use a kitchen or dish scrubber. Apply vinegar all over the bowl and wait for a while. Scrub the stained area with a toilet brush. The best option for the brush is a brush with stiff nylon bristles. They are strong and spongy enough to scrub even the hardest water stains. If you spot some remaining stains or marks, repeat the process until getting a good result.

Here is one more tip for you. If you have an old toothbrush, which you don’t use now, use it for this purpose. It will effectively remove spots from hard-to-reach areas, especially around the corner of the bowl where the stains are more stubborn. An old kitchen dish brush will work better too.

Pumice stone

It may happen sometimes to someone that even the toilet brush can’t solve the problem. There is a severe solution to this issue. Soak the stained area with vinegar and try to rub them with a pumice stone for about 20 to 30 minutes. It is a proven method by many people and it’s a cleaning method that cleanses without unwanted damage to the porcelain. Add vinegar while scrubbing the stains if necessary.

So these are the most commonly used methods by people to remove the hard water stains from your bathroom. We know that it’s very disgusting to walk into a stained bathroom. But you have to be regular to keep the stains away from the floor. Remember, prevention is better than cure.

Leave a Reply

Your email address will not be published. Required fields are marked *